: If using a 64-bit system for older software, it is often necessary to run the software and drivers within a Virtual Machine (VMware) running a 32-bit version of Windows.
: Windows should attempt to detect the device. If it fails, open Device Manager and look for a "USB-to-CAN" or "ACTIA" entry with a yellow exclamation mark.
Installation typically follows these steps to avoid communication errors like "VCI not found": actia psa xs evolution drivers
: While official drivers support Windows 10 and 11, many older versions of Lexia 3 and PP2000 require Windows XP SP3 (32-bit) or Windows 7 (32-bit) .
: Once installed, the interface should appear as an "ACTIA USB Devices" or similar entry without errors. Compatibility and System Requirements : If using a 64-bit system for older
: Right-click the device, select "Update Driver," and point the wizard to the folder where you installed DiagBox (usually C:\APP\Drivers ).
: Always install the diagnostic software (e.g., DiagBox) before plugging in the hardware. Most modern versions include the necessary drivers in the installation package. Connect Hardware : Plug the ACTIA PSA XS Evolution into your computer’s USB port. : Always install the diagnostic software (e
: The ACTIA IME Support Center provides the Basic+ XS / CAT Level X driver (Version 2.9.0.8) and the Lite XS Level X driver (Version 2.9.0.0). These are compatible with Windows 8, 10, and 11 (x86/amd64).
: For DiagBox 7.xx and newer, your adapter firmware should ideally be Version 4.3.2 (Reference "C"). Older Reference "B" adapters may only work with DiagBox 6.xx or earlier. Common Troubleshooting Support - ACTIA IME