Battery Charger Ac-60cr Manual: Autocraft

Features built-in safeguards against short circuits, overcharging, and reverse polarity (protecting the unit if clamps are accidentally swapped). Operating Instructions: Step-by-Step Follow these steps to ensure a safe and effective charge:

Set the voltage switch (6V or 12V) and the charge rate (2A or 6A) based on your battery type.

The AC-60CR is engineered for versatility with several core functions: autocraft battery charger ac-60cr manual

Use a wire brush to remove corrosion from the battery posts. Connect Clamps: Connect the Red (+) clamp to the positive battery post.

Automatically adjusts the charging rate to prevent overcharging and extend battery life. Connect Clamps: Connect the Red (+) clamp to

Supports both 6V and 12V lead-acid batteries.

Connect the clamp to a grounded part of the vehicle's chassis, away from the battery and fuel lines, to minimize spark risk. Connect the clamp to a grounded part of

Once the battery is fully charged (often indicated by a green LED or a meter needle dropping to zero), unplug the AC cord first, then remove the chassis clamp, and finally the positive clamp. Essential Safety Warnings YouTube·Homeowner Repair How To Use A Battery Charger On Your Vehicle