Biosystems Bts 350 User Manual 【2026 Release】

The user interface is menu-driven. To program a new technique:

Check the aspiration volume. If the volume is inconsistent, inspect the peristaltic pump tubing for wear or "memory" flat spots. 5. Troubleshooting Common Error Codes

Choose from End Point, Kinetic, Fixed Time, or Differential. biosystems bts 350 user manual

Before running your first test, ensure the unit is placed on a level, vibration-free surface away from direct sunlight.

Perform a deep clean using a specialized laboratory detergent (like BioSystems Bio-Set) to remove protein buildup. The user interface is menu-driven

Connect the unit to a stabilized power source. The BTS-350 performs an automatic self-check of the optical and mechanical systems.

Check for a blockage in the intake needle or a leak in the peristaltic pump tubing. Conclusion Perform a deep clean using a specialized laboratory

Usually indicates a dirty flow cell or a failing LED. Try an intensive cleaning cycle first.

Allow the unit 10–15 minutes to reach the programmed temperature (usually 37°C for most enzymes). 3. Programming and Running Assays

Always run a fresh standard or calibrator when switching reagent lots. 4. Routine Maintenance (The "Golden Rules")