Air Spring, Rebound, and Compression Lockout Fluid Type: 7wt or 10wt High-Performance Suspension Oil Mounting Hardware: 8mm x 22mm (Standard) Weight: ~265g (depending on size) ⚙️ Initial Setup and Installation 1. Mounting the Shock Ensure the frame’s mounting points are clean.
SAG is the amount the shock compresses under your body weight. For the BR 3021, aim for . Slide the O-ring against the shock body. Sit on the bike in full riding gear without bouncing. Gently dismount and measure the distance the O-ring moved. To increase SAG: Release air via the Schrader valve. To decrease SAG: Add air using a high-pressure shock pump. 🔄 Adjustment Guide Rebound Damping (Red Knob)
Wipe the stanchion (inner tube) with a clean microfiber cloth to remove dust. br 3021 shock manual
Restricts movement for efficient climbing on fire roads or pavement. 🧰 Maintenance Schedule To keep the BR 3021 smooth, follow this service interval:
Perform a basic air sleeve service. Clean the internal seals and re-lubricate with dynamic seal grease. Air Spring, Rebound, and Compression Lockout Fluid Type:
Turn counter-clockwise if the shock feels like it stays down (packing) over repeated bumps.
Apply a thin layer of waterproof grease to the mounting bolts. For the BR 3021, aim for
Start in the middle click and adjust by two clicks at a time. Compression/Lockout (Blue Lever) This controls the shock's resistance to pedaling forces. Open: Full travel for downhill and technical terrain.