Traditional fonts have "closed loops" (inner and outer boundaries). If you try to engrave a standard font, the CNC machine will trace the outline of each letter twice, which is inefficient. CAMWorks.ttf is often referred to as a "stick font" or "single line font," meaning the machine only makes a single pass for each character stroke.
Unlike standard digital fonts (like Arial or Calibri) which are designed for readability on paper or screens, CAMWorks.ttf is optimized for toolpaths.
By using a single-line font, you significantly reduce the cycle time for engraving operations on CNC mills , laser cutters, and water jets.
Because it is a standard Windows font file, the installation process follows the typical Windows protocol. (1) OpenSource "Single Line Font" ? - FreeCAD Forum
5 thoughts on “Export the results of best practice analyzer from all models”
Camworks.ttf [exclusive] File
Traditional fonts have "closed loops" (inner and outer boundaries). If you try to engrave a standard font, the CNC machine will trace the outline of each letter twice, which is inefficient. CAMWorks.ttf is often referred to as a "stick font" or "single line font," meaning the machine only makes a single pass for each character stroke.
Unlike standard digital fonts (like Arial or Calibri) which are designed for readability on paper or screens, CAMWorks.ttf is optimized for toolpaths. camworks.ttf
By using a single-line font, you significantly reduce the cycle time for engraving operations on CNC mills , laser cutters, and water jets. Traditional fonts have "closed loops" (inner and outer
Because it is a standard Windows font file, the installation process follows the typical Windows protocol. (1) OpenSource "Single Line Font" ? - FreeCAD Forum Unlike standard digital fonts (like Arial or Calibri)
hi Ake,
Thanks for the comment! Yes that’s something I added myself in the extracted JSON rule file, you can either add it too or remove the M code part but if you’re not sure where to remove it I’d advise to add the [severity] in the file like I explained in the post: Here is an example of my rule description: “[Performance] [2] Do not use floating point data types” where [2] is the severity.
hi
i have an issue.
i’ve installed TE 2 and have a model.bim file on my machine and already downloaded bpa.json. but when I run the script in powershell I face this error:
TabularEditor.exe : The term ‘TabularEditor.exe’ is not recognized as the name of a cmdlet, function, script file, or
operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try
again.
At line:2 char:1
+ TabularEditor.exe “d:\Model.bim” -A > bparesults.txt
+ ~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (TabularEditor.exe:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
hi Mahdi,
Can you copy/paste your script here