Caselabs Sma8: Manual

Use a mild microfiber cloth and distilled water to clean the aluminum panels. Avoid harsh chemicals that can strip the powder coat.

The chassis exclusively uses 6-32 thread screws for the frame and M3 screws for specific drive mounts.

This comprehensive guide serves as your definitive assembly, layout, and component manual for the CaseLabs SMA8. Technical Specifications & Dimensions caselabs sma8 manual

Dedicated compartment for power supplies and heavy radiator configurations.

The SMA8 features a completely modular, screw-together design. Unlike riveted cases, you can strip it down to the bare frame using a standard Phillips #2 screwdriver. Main Chamber Use a mild microfiber cloth and distilled water

Position fans to exhaust out the side ventilation panels. Front Mount Format: 120mm wide Maximum Size: Up to 360mm (3x120mm)

Integrated cable management pass-throughs with rubber grommets. Lower Chamber This comprehensive guide serves as your definitive assembly,

To assemble the frame from a flat-pack or stripped-down state, follow these steps: 1. Assemble the Base and Frame Lay the bottom chassis plate flat on a non-scratch surface.

Includes mounting rails for 120mm and 140mm-based radiators. Assembly Instructions

Up to 120mm of combined radiator and fan thickness. Bottom (Lower Chamber) Mount Format: Dual side-by-side mounts