Installation Manual Fix — Crawford Cdm9 950

: Switch the power off and then back on before starting the installation sequence.

: Disengage the door and position it approximately 1.5 meters above the floor before engaging the operator again.

The Crawford CDM9 complete set typically includes a 0.37 kW motor, approximately 60 Nm of torque, and a 10-meter cable for connection between the motor and the control box. : 340 x 230 x 140 mm. crawford cdm9 950 installation manual

: The operator should be installed at least 2.5 meters above the floor for safety. Electronic Setup and Commissioning (ECS 950)

: Check if the operator is accidentally disengaged or if the contacts (X4/X5) in the control box lid are loose. : Switch the power off and then back

: Install the second stop ring and mount the torque bar. A rubber damper must be placed between the torque bar and the console to absorb vibration.

For detailed technical diagrams and specific wiring layouts, refer to the full Crawford CDM9 / ECS 9xx Installation Manual . : 340 x 230 x 140 mm

Are you currently seeing a specific on the ECS 950 display, or are you performing a first-time setup ? 19146212.s21i.faiusr.comhttps://19146212.s21i.faiusr.com