Cs-2200 Icom Ic-2200h Programming Software [Trusted Source]
This is the proprietary Icom software designed specifically for the IC-2200H. It is compatible with most Windows environments. Ensure you have the correct version to match your radio’s firmware. 2. OPC-478 Programming Cable
Access menu options for DTMF, scanning edges, and packet settings more intuitively than navigating nested menus on the radio's small LCD. Requirements for Setup
The IC-2200H uses the (or the USB version, OPC-478UC ) cable. This cable plugs into the speaker jack on the back of the transceiver and connects to your PC’s USB or Serial port. CS-2200 Icom IC-2200H Programming Software
Mastering the Icom IC-2200H: A Guide to CS-2200 Programming Software
If you see a yellow exclamation mark in Device Manager, you likely need to roll back or update your USB-to-Serial drivers. Final Thoughts This is the proprietary Icom software designed specifically
If you are using the USB version of the cable, you must install the specific Silicon Labs or FTDI drivers required for your PC to recognize the cable as a COM port. Step-by-Step Programming Guide
In this guide, we’ll explore how this software streamlines your setup and what you need to get started. Why Use CS-2200 Programming Software? This cable plugs into the speaker jack on
Plug the OPC-478 cable into the radio’s speaker jack and your computer. Turn the IC-2200H ON .
While "finger-programming" is a useful skill for field adjustments, the CS-2200 software offers several distinct advantages for the serious ham radio operator:
Enter your desired frequencies, duplex offsets (+ or -), CTCSS/DCS tones, and channel names (up to 6 characters).
