: Once the installation completes, go to "Devices and Printers" in your Control Panel. Right-click the newly installed E-POS printer and select "Set as default printer." Configuration and Optimization
: Choose the model that matches your hardware (e.g., E-POS 80mm Series).
To get the most out of your thermal printer, you should tweak the printing preferences within the driver settings. e-pos printer driver ver.2.0
: During the installation wizard, you will be prompted to choose your connection type. Most modern setups use USB; however, if you are using a legacy system, select the appropriate COM or LPT port.
: If an older version of the driver was previously installed, uninstall it completely and restart your computer before re-installing Ver.2.0. : Once the installation completes, go to "Devices
: Unzip the folder and right-click the setup file, selecting "Run as Administrator."
: For Serial/RS232 connections, ensure the baud rate in the driver matches the physical dip-switch settings on the bottom of the printer (usually 9600 or 19200). : During the installation wizard, you will be
If you encounter issues where the printer remains "Offline" or produces "Gibberish" text, try these quick fixes:
: Access the "Device Settings" tab to enable or disable the "Partial Cut" or "Full Cut" feature after each receipt is printed.
: Ensure the paper size matches your physical roll. Setting an 80mm driver to a 58mm roll will result in cut-off text.