E8372h-153 Dead - Boot Repair

The device will automatically reboot and should now show signal lights. Troubleshooting Tips

While holding the short, plug the device into your PC’s USB port. Release the short after 2 seconds. E8372h-153 Dead Boot Repair

Use a plastic prying tool to separate the two halves of the shell. The device will automatically reboot and should now

Remove the small screws located under the cap or back cover. E8372h-153 Dead Boot Repair

Since the device won't boot normally, you must force it into "USB COM" mode. Open on your Windows PC.

Select the correct .bin bootloader file specifically for the E8372h-153. Click or Start .