If the automatic process fails, follow these steps using the official FTDI setup executable : the setup executable from the FTDI Drivers page.
is part of the FTDI "X-Series" chips, designed for high-speed data transfer (up to 3MBaud) with full handshake support. Official FT231X USB UART Driver Links
, then follow the wizard prompts to accept the license agreement. Connect device to a USB port. ft231x usb uart driver link
Finding the correct is the first step toward getting your USB-to-serial device working. The
Available on the FTDI VCP Drivers page. Note that newer macOS versions (10.15 and later) may require the "Dext" version of the driver. Linux Drivers: If the automatic process fails, follow these steps
the downloaded file and select "Run as Administrator".
Use the Windows Setup Executable which automatically installs both Virtual COM Port (VCP) and D2XX drivers for Windows 7, 8, 10, and 11. Connect device to a USB port
Most modern Linux kernels (2.6.39 and later) include built-in support for the , so no separate download is usually needed. How to Install the 1. Automatic Installation (Windows)
Open Device Manager (Win + X > Device Manager). Look for USB Serial Port (COMx) under "Ports (COM & LPT)". Key Specifications of the Specification Data Transfer Rate 300 Baud to 3 Mbaud USB Protocol USB 2.0 Full Speed (12 Mbps) UART Signals TXD, RXD, RTS, CTS, DTR, DSR, DCD, RI I/O Voltage 1.8V to 3.3V (5V Tolerant) Buffers 512-byte Receive, 512-byte Transmit Drivers - FTDI