Plug the AC power adapter into the camera and a non-switched outlet. Wait approximately 2–3 minutes for the camera to boot. The status LED should begin to , indicating it is ready for Wi-Fi configuration.
: An active Alarm.com account with a service package that supports video.
The "http://v515install" URL is a critical web-based interface used to set up the Alarm.com ADC-V515 1080p Indoor Wi-Fi Camera Go to product viewer dialog for this item. http v515 install
Follow the on-screen instructions in the portal to scan for and select your home's 2.4 GHz Wi-Fi network. Enter your network password when prompted. The camera's LED will turn once it has successfully connected to the internet. 5. Add the Camera to Your Alarm.com Account
Before starting the installation process, ensure you have the following ready: : Your camera and its included AC power adapter. Plug the AC power adapter into the camera
. This address allows users to connect their camera to a local 2.4 GHz Wi-Fi network when using Access Point (AP) mode. Pre-Installation Checklist
With the camera online (solid green LED), you must link it to your security account: 1080p Indoor Wi-Fi Camera Installation Guide - Surety : An active Alarm
: A 2.4 GHz Wi-Fi connection. Note that the does not support 5 GHz networks.
Using a smartphone or computer, search for available Wi-Fi networks. Connect to the network named , where "XX" represents the last six characters of the camera's MAC address. 3. Access the Configuration Portal