Depending on the drive model, you may need a USB-A to USB-A cable or a USB-to-Serial (TTL) adapter .
You must often disable flash protection and erase the original factory firmware before adding and flashing the hxc-fw-installer.hex file. Hxc-fw-installer.hex
Connect the drive to your computer using your chosen cable. Depending on the drive model, you may need
Tools like STM32 Dfuse or the Artery ISP Programmer are required to upload the .hex file from a PC to the drive. Flashing Procedure The installation process generally follows these steps: Tools like STM32 Dfuse or the Artery ISP
Update procedure. Strap the BOOT0 signal as shown on the above picture. Connect the Gotek to your PC with the USB A USB A cable. ( HxC bootloader installation - HxC2001
The primary purpose of hxc-fw-installer.hex is to prepare a "blank" or factory-stock Gotek drive for the HxC ecosystem. Once this .hex file is flashed onto the drive's internal memory, it installs a specialized bootloader that enables future firmware updates to be performed simply by using a USB stick, eliminating the need for further hardware-level programming. Prerequisites for Installation