Jby6201 Manual ((free)) File

Once the pump is primed and air-free, you are ready to apply coating.

Submerge the suction tube into a bucket of water or mineral spirits. Place the smaller return tube in a waste bucket. Turn the power switch ON .

Keep the gun 10–12 inches from the surface. Move your arm before pulling the trigger, and release the trigger before stopping your movement to avoid "piling" paint. 4. Safety Precautions Warning: High-pressure injection hazard. jby6201 manual

Ensure the high-pressure hose is tightly connected to the machine and the spray gun.

Ensure you are plugged into a grounded outlet to prevent static sparks. 5. Cleaning and Long-Term Storage Once the pump is primed and air-free, you

The spray tip may be worn or the gun needle needs adjustment. Ensure the tip is fully seated in the guard.

Usually supports up to a 0.017" or 0.019" tip. 2. Initial Setup & Priming Turn the power switch ON

Turn the Prime/Spray valve to the PRIME position (usually pointing down or toward the return tube).

Turn the Prime/Spray valve to the SPRAY position.