Service personnel and experts (as defined by Dräger) should perform the following tasks to maintain device accuracy:
The is a non-invasive transcutaneous bilirubinometer used to screen newborn infants for jaundice. A full service manual is essential for technical personnel to ensure the device remains calibrated and functional for critical neonatal care. Core Manual Components
: The reusable probe tip must be cleaned with an alcohol swab before and after each measurement to prevent cross-contamination. Troubleshooting Common Issues jm105 service manual full
: A standard procedure to verify device readiness. Remove the unit from its docking station and power it on. Select CHECKER from the menu.
: Device classification (e.g., Type BF internally powered ME equipment) and standards compliance. Essential Service & Maintenance Tasks Service personnel and experts (as defined by Dräger)
: A full charge takes approximately two hours and provides enough power for roughly 250 measurements. The device should be returned to its docking station when not in use.
: If the green ready lamp is off, the unit may not be sufficiently charged or may have failed its self-check. Troubleshooting Common Issues : A standard procedure to
: Detailed descriptions of how the device uses light to measure subcutaneous bilirubin levels.
: If measurements fall outside expected clinical parameters, technicians must verify the light checker range and clean the sensor tip before re-testing. Official Documentation Access