Kes Geyser Load Control Timer Manual New -

Always ON, but automatically locks out during morning and evening peak hours (Monday–Friday). Prog 2 2 flashes / second

The unit can be mounted on a DIN Rail inside your DB or a surface-mounted enclosure. Wiring: Connect the Live (L) input from the geyser circuit breaker. Connect the Neutral (N) wire from the DB's neutral bar.

If the Blue LED is flashing but the Red LED never turns on, check if you are currently in a "Peak Time" lockout or if you have accidentally selected Program 3 (Always Off) . kes geyser load control timer manual new

Most KES models block overrides during peak demand times (typically 06:00–08:00 and 18:00–20:00) to comply with load-balancing standards. Installation & Setup Instructions

The controller features a 60-day battery backup to maintain your settings and clock during load shedding or power failures. Always ON, but automatically locks out during morning

The device features three primary LED status indicators and four preset profiles: Indicates the mains power is ON. Red LED: Indicates the geyser itself is ON and heating.

ON for only 6 hours on weekdays and 12 hours on weekends. Highly restrictive to minimize costs. Manual Controls & Override Connect the Neutral (N) wire from the DB's neutral bar

Connect the (bottom of controller) to the geyser wire.

The (specifically model ISG1201 ) is a specialized device designed to manage water heating and reduce energy bills by preventing operation during peak demand periods. Unlike standard digital timers that require complex manual scheduling, the KES model uses pre-programmed operating profiles to simplify user interaction. Understanding Your KES Geyser Timer (ISG1201)

If you need hot water outside of your selected program's schedule, you can use the feature.