Lenel Lnl-3300-m5 Installation Manual Upd -

Lenel LNL-3300-M5 Installation & Migration Guide The Lenel LNL-3300-M5 Go to product viewer dialog for this item.

Before beginning, ensure you have the following requirements and tools: 12 VDC ± 10% at approximately 300mA.

Plug in the 12 VDC power input, cabinet tamper input, and AC power fail inputs. The LNL-3300-M5 is one-for-one plug compatible with these connections. 3. Initial Configuration & IP Setup LNL-3300-M5 - Stebilex Systems Lenel Lnl-3300-m5 Installation Manual UPD

Legacy CASI M Series boards cannot be mixed with Lenel M Series boards in the same controller; if you convert a controller, all boards within it must be upgraded to the Lenel M Series. 2. Physical Installation Steps To install or migrate to the LNL-3300-M5

Label and unplug the field wiring and the power/comm board connectors from the legacy CPU. Lenel LNL-3300-M5 Installation & Migration Guide The Lenel

OnGuard software must be licensed and configured for the LNL-3300 series.

: Mount the new board onto the existing standoffs in the enclosure. The LNL-3300-M5 is one-for-one plug compatible with these

The board is designed to retrofit into legacy CASI M5/M3000 enclosures.

Unscrew and remove the legacy M5/M3000 CPU (e.g., E, P, PX, PXN, or PXNplus) and the CASI Power/Comm Board (PN: 110064001). Insert LNL-3300-M5

Completely power down the legacy controller and disconnect the backup battery.