Open the motor hatch, loosen the clamping screws, and remove the protective cap. Attach the operator to the runner using the provided omega-shaped support brackets and hexagonal-headed screws.
Lift the front part of the runner and secure the front brackets to the wall or ceiling. Ensure the runner is perfectly level before fixing the rear brackets firmly to the ceiling. Mechanical Stops:
The mechanical setup involves mounting the operator onto its guide rail (runner) and securing it to the garage structure. Open the motor hatch, loosen the clamping screws,
Standard tools include a drill with masonry bits, screwdrivers, a spirit level, and protective goggles.
The is an irreversible electromechanical operator designed for automating residential sectional and up-and-over garage doors. This comprehensive guide synthesizes the critical 10-page manual instructions for professional installation, daily use, and long-term maintenance. 1. Preliminary Safety Checks Ensure the runner is perfectly level before fixing
Open the door to the desired height, position the opening stop against the carriage, and fix it in place. 3. Electrical Connections & Programming
Verify the garage door is mechanically sound, perfectly balanced, and moves smoothly without catching. For up-and-over doors
For up-and-over doors, the APRB oscillating curved arm is mandatory for correct operation. 2. Mechanical Installation
Before starting the installation, ensure the following conditions are met:
The installation area must have sufficient clearance for both maintenance work and the manual release cord.