Logitech Z5500 Wiring Diagram Exclusive Today

If your original control pod has failed, you can create a custom bypass cable. This allows you to feed audio signals directly into the subwoofer's amplifier from an external AV receiver, PC, or DAC. Essential Materials 1x solder-cup connector Multi-core shielded wire (or RCA patch cables) Soldering iron & electrical solder 1x 10k Ohm resistor (to bridge the trigger pins) Steps to Power On the Internal Amplifier To bypass the control pod Go to product viewer dialog for this item.

together (these are the channel enable lines).

Once the amplifier is powered on, you can feed standard line-level audio signals into it: logitech z5500 wiring diagram exclusive

When repairing or modifying the Logitech Z-5500 , always observe the following precautions:

(On/Off) and Pin 12 (Mute) directly to the Pin 13 (Ground) line to un-mute the amplifier chipsets. Steps for Audio Input Connection If your original control pod has failed, you

The connection between the control pod and the subwoofer uses a port on the back of the subwoofer. Pin numbers are read directly from the back of the plug or the solder side of the connector.

Older models feature spring-clip connectors for the satellite speakers, while newer variants use RCA jacks. The logic pinouts are slightly different, so use a multimeter to verify ground before applying external power. together (these are the channel enable lines)

The complete Logitech Z-5500 Go to product viewer dialog for this item.