Point-n-measure Digital Tape W5746 User Manual Repack May 2026

This usually means the device is too close to a surface (under 2 feet) or the signal is being absorbed by a soft surface (like curtains). Try measuring against a solid, flat wall.

Ensure the device is held perfectly perpendicular to the target. An angled measurement will result in an incorrect distance.

Measure the , then the Width , then the Height of the space. Point-N-Measure Digital Tape W5746 User Manual

The device will automatically multiply the two and display the total Area. Calculating Volume (Cu. Ft / m³) Press the button.

This comprehensive guide serves as your digital manual to help you master the W5746 and get the most out of its features. 1. Product Overview & Key Specifications This usually means the device is too close

Press the button. The distance will appear on the LCD screen. Calculating Area (Sq. Ft / m²) Press the AREA button. Measure the Length of the room (Press READ). Measure the Width of the room (Press READ).

This is a sign of a low battery. Replace the 9V battery immediately for the most accurate results. Safety Warning An angled measurement will result in an incorrect distance

Hold the device steady and point the laser/sensor at a flat target (like a wall).