Install ((free)) - Pollyfan Nikole

Slide the receiver into the mounting bracket above the downrod ball. White to White: Neutral wires. Black (or Blue) to Black: Power/Lead wires. Green/Copper to Green: Ground wires.

If the fan wobbles slightly, check that all blade screws are tightened equally. The Pollyfan Nikole is precision-balanced at the factory, so a wobble is usually caused by a loose screw or a junction box that isn't perfectly flush. Enjoy the Breeze

If your Nikole includes an LED kit, plug the quick-connect wire harness together and screw the light pan into the bottom of the motor. Snap the glass shade or diffuser into place. Testing Your Installation pollyfan nikole install

Thread the electrical wires from the motor through the downrod. Insert the downrod into the motor yoke, secure it with the clevis pin and cotter pin, and tighten the jam screws to prevent wobbling. Step 3: Hanging the Fan

Secure the Nikole mounting bracket to the junction box using the provided heavy-duty screws and washers. Step 2: Assemble the Fan Motor and Blades Slide the receiver into the mounting bracket above

With the installed, you’ve added both value and comfort to your home. Its energy-efficient DC motor will keep your space cool while remaining virtually silent.

The Pollyfan Nikole uses a specialized bracket designed to minimize vibration. Remove your existing light fixture or old fan. Green/Copper to Green: Ground wires

Depending on the specific Nikole model, you may need to attach the blades to the motor housing before hanging it. Align the blade holes with the motor screw holes and tighten them firmly.

Go to your home’s breaker box and switch off the circuit for the room where you’re working. Use a voltage tester at the ceiling wires to double-check that no electricity is flowing. Step 1: Prepare the Mounting Bracket

One of the Nikole’s best features is its aerodynamic blade pitch.