Qidi X-pro Manual Access

The dual extruder assembly must be manually secured with two screws (typically 2.5mm). Orient the nozzles so the fans face forward.

The X-Pro uses assisted manual leveling via its 4.3-inch touchscreen to ensure a flat printing surface. qidi x-pro manual

The QIDI X-Pro is a versatile, fully enclosed 3D printer featuring a unique dual direct-drive extrusion system designed for multi-material and multi-color printing. While the machine is largely pre-assembled, effective operation depends on following a precise setup and maintenance routine. The dual extruder assembly must be manually secured

The X-Pro arrives nearly ready to use, though some critical assembly and removal of shipping materials are required. The QIDI X-Pro is a versatile, fully enclosed

Plug the power cord into the lower-left corner at the back and use the primary power switch to start the machine. Calibration and Bed Leveling

Take out the protective foam and cut the plastic ties securing the extruders. Ensure you remove the belt fixing clips from both sides of the Y-axis.