Siemens Hipath 3800 Programming Manual |work| May 2026

Connect directly to the system via LAN or V.24 serial cable to make real-time changes. 2. Initial Connection & System Access

Before assigning extensions, the system must recognize its hardware. You must "inventory" the slots to tell the software which boards are in which positions (e.g., SLMO for digital extensions, TS2 with clocking for ISDN/PRI). B. Numbering Plans siemens hipath 3800 programming manual

Ensure you have the correct version of Manager E compatible with the system's firmware (HE6xxx). Connect directly to the system via LAN or V

Always log changes in the "Customer Data" section of the Manager E for future troubleshooting. You must "inventory" the slots to tell the

Unlike modern web-based interfaces, the HiPath 3800 is primarily programmed using . This is a Windows-based software suite that allows you to manage the system database.

Always "Transfer from System to PC" before making changes.

LCR is where you program how the system handles outgoing calls. You can set the system to automatically choose the cheapest route (IP vs. ISDN) based on the dialed prefix. D. Analog and Digital Extensions