Sinotimer Mc101 Manual [2021] < TRUSTED • 2027 >

If using an SSR to control a high-current load, always attach a heat sink to prevent the relay from overheating.

Ensure the thermocouple type set in the software matches the physical sensor connected to avoid incorrect readings.

Connect the resistor element between Terminals 8 and 9 , with the third "extra" wire going to Terminal 10 . Control Output: sinotimer mc101 manual

The is a high-precision PID (Proportional-Integral-Derivative) temperature controller designed for industrial and laboratory applications where tight temperature control is essential. Featuring a four-digit LED display and an accuracy rating of 0.3%, this device is compatible with various sensors and power supplies, making it a versatile tool for automation. Key Specifications and Features

Connect the positive and negative leads to the designated input terminals (check label for polarity). If using an SSR to control a high-current

For models, use the internal relay contacts to switch your load.

Sinotimer devices are built to resist dust and moisture, but they should still be housed in a proper enclosure for longevity in harsh environments. Temperature Controller - Sinotimer For models, use the internal relay contacts to

For models, connect Terminal 5 (positive) and Terminal 4 (negative) to the control input of your Solid State Relay. Configuration and Setup

Hold the (or SET + <) keys for 3 seconds to enter the menu. Use the arrows to find the "Unit" parameter. Change the value from 000 (Celsius) to 001 (Fahrenheit). Hold the MODE key for 3 seconds to exit and save. Entering PID Auto-Tuning: