Wella Climazon Millenium Manual Install -

The device often features an internal locking latch. Ensure the head is pushed down until it "clicks." You can verify the lock by attempting to lift it gently without using the release mechanism.

Lift the Climazon head and align its mounting point with the top of the pedestal tube.

Determine if the wall is solid masonry or reinforced studs. Use the Acrobat 2004 manual to verify load-bearing requirements. wella climazon millenium manual install

Use the brake screws on the arm to adjust the swivel resistance and the internal tension screw to balance the vertical movement based on the head's weight. 4. Technical Maintenance and Resources

Unscrew the extension locking screw from the pedestal tube. Warning: The internal spring may cause the tube to extend slowly; ensure no people or objects are directly in front of it. The device often features an internal locking latch

If the operating lights blink, refer to the Wella Climazon² troubleshooting guide .

Align the tube vertically with the base plate. Insert it and tighten the locking screw from the underside of the base until the tube is firmly immobilized. Phase B: Mounting the Device Head Determine if the wall is solid masonry or reinforced studs

Comprehensive Installation Guide for the Wella Climazon Millenium

The (often referred to in technical documentation alongside the Climazon²) is a cornerstone of professional salon equipment, offering precision infrared heating for coloring, perming, and drying treatments. Proper installation is critical to ensure both the safety of your clients and the longevity of the device.

Align the mounting bracket and mark the drill holes. Insert heavy-duty wall anchors and secure the bracket with the provided high-tensile screws. Phase B: Attaching the Arm and Head