Xh-m608 | Manual [exclusive]

Integrated voltmeter, undervoltage/overvoltage protection, and a timing discharge function. 2. Wiring Guide

The relay on the board should be placed "in-line" with one of the wires (typically the positive) of your charger or load. Xh-m608 Manual

Sets the trigger for stopping a charge or starting a discharge. Xh-m608 Manual

The module uses a menu system (P0 to P3) to define its behavior. Use the button to navigate and the + / – buttons to adjust values. P0: Operating Mode Selection Xh-m608 Manual

Relay closes when voltage ≤ P1 (lower limit) and opens when voltage ≥ P2 (upper limit).

Relay output (works as a switch for your charger or load). Dimensions: Approximately 66 x 46 x 16mm.