Xycd60 Manual Link ✪ <ESSENTIAL>

To configure the module, you must set specific limit values based on your battery type (e.g., 12V, 24V, or 48V systems). Description Range / Notes Upper Limit Voltage Relay disconnects (Charging) or connects (Discharging). dn Lower Limit Voltage Relay connects (Charging) or disconnects (Discharging). OP Conduction Time Set a specific duration for the relay to remain closed. dOP Delay Start Time Set a delay (0–999s) before the relay activates. FOP Forced Start Time

(Discharging only) Prevents instant disconnect due to voltage sag. xycd60 manual link

You can manage settings using the physical buttons on the module: RoboFactory To configure the module, you must set specific

Protects against deep discharge by disconnecting the load when the battery drops to the "dn" (Lower Limit) voltage. Key Parameters & Settings To configure the module